Dell T5610 SOLIDWORKS E5-2637 V2 4 Cores 3.5Ghz 32GB 250GB SSD W7000 Win 10

SOLIDWORKS 3D CAD workstations are designed for optimal performance to give you the power you need to efficiently complete your work. Recommended for performance: Processors Speed – Faster the better. Recommend 3Ghz or higher. Processor Cores – Higher core counts are only utilized when rendering. We recommend 4 cores or more. Memory (RAM) – 20x of your compacted central project file is a good rule of thumb. Recommend 16GB or higher. Storage – Faster drives will improve overall workstation responsiveness. Its recommended to use a SSD for the Operating system and program loading, and HDD for file storage. Graphic Card (GPU) – Dedicated video cards supporting DirectX 11 or later are strongly recommended. This workstation is certified to work with SOLIDWORKS.

Processor: Single Intel Xeon E5-2637v2 Quad Core 3.5Ghz Processor 4 Cores, 8 Virtual Cores in Hyperthreading Mode! (Additional processor configurations available)

Memory: 32GB DDR3-1866 Memory. Supports up to 128GB of total memory, Quad channel up to 1866MHz ECC RDIMM memory; 8 DIMM slots (4 per processor). (actual memory speed dependent on the processor capability)

Storage: New 250GB 6Gb/s SATA Solid State Drive

Drive Bays: Up to three 3.5″ or four 2.5″ internal SATA, SAS or SSD drives. Additional add-in controller required for SAS hard drives.

Raid Controller: Intel AHCI 6Gb/s SATA controller with six ports (two
6Gb/s, two 3Gb/s, two reserved for optical drives)
supports software RAID 0, 1, 5, 10

Graphics: AMD FirePro W7000 4GB GDDR5 Graphic Card, DirectX 11.1 (Certified Hardware for SOLIDWORKS)

Operating System: Windows 10 Professional 64-Bit Pre-Installed

Software: SOLIDWORKS Software is not included

Power Supply: 825W Power Supply

Optical: DVDRW Drive

Networking Intel 82579 Gigabit Ethernet controller with Remote Wake UP, PXE and Jumbo frames support.

Slots: Two PCIe x16 Gen 3; two additional PCIe x16 Gen 3 (requires second processor option); one PCIe x16 Gen 3 wired x4; one PCIe x16 Gen 2 wired x4; One PCI 32bit/33MHz.

Front Ports: 3 – USB 2.0, 1 – USB 3.0, 1 – Microphone, 1 – Headphone.

Rear Ports: 3 – USB 2.0, 3 – USB 3.0, 2 – PS2, 1 – Serial, 2 – RJ45.

Internal Ports: 3 – USB 2.0, 8 – SATA/SAS 6Gb/s, 2 – SATA 6Gb/s (for optical drives).

Peripherals: Power Cable Included. Mouse, Keyboard, and Video Cable Not Included.

Condition: Seller refurbished unit may have minor scratches and scuffs

*Systems are built to order and fully customizable. Please call for more information. Note that a stock photo is used and unit may differ depending on configuration.