Supermicro FatTwin F627G3-FT+ 4U 4-Node 8-Bay LFF GPU Server X9DRFF-iG+ CTO

Specifications: Form Factor 4U Rack Mount 4 Hot-plug System Nodes in 4U Front I/O Model SUPERMICRO F627G3-FT+ – 8 3.5″ Bays Processor (s) NOT INCLUDED Each node supports Dual Socket R (LGA 2011) Intel® Xeon® processor E5-2600 and E5-2600 v2 family (up to 130W TDP) Memory NOT INCLUDED Each node supports: 16x 240-pin DDR3 DIMM slots Up to 1TB DDR3 ECC LRDIMM Up to 512GB DDR3 ECC Registered memory (RDIMM) Up to 128GB DDR3 ECC Un-Buffered memory (UDIMM) Memory type and DIMM Sizes 1866/1600/1333/1066/800MHz ECC DDR3 SDRAM 72-bit, 240-pin gold-plated DIMMs 32GB, 16GB, 8GB, 4GB, 2GB, 1GB Hard Drives NOT INCLUDED 2x 3.5″ Hot-swap SATA HDD bays (per node) GPU/Xeon Phi Support 3x Double-width GPU/Xeon Phi per node (total of 12x GPU/Xeon Phi cards in 4U) Supports Intel Xeon Phi Supports NVIDIA K80, K10/K20/K20X (Kepler), K1/K2, and M2090/M2075 Power Supply 4x 1620W PWS-1K62P-1R Optical Drive N/A Network Intel® i350 Dual Port Gigabit Ethernet Virtual Machine Device Queues reduce I/O overhead Supports 10BASE-T, 100BASE-TX, and 1000BASE-T, RJ45 output 1x Realtek RTL8201F PHY (dedicated IPMI) Remote Access Support for Intelligent Platform Management Interface v. 2.0 IPMI 2.0 with virtual media over LAN and KVM-over-LAN support Nuvoton WPCM450 BMC Rackmount Rails Included Operating System None Power Cord Not included
Condition: Off-lease equipment. Clean and tested by qualified technician. Each server is configured to order. This process involves rigorous quality control which includes: Throughout visual inspection for physical damages Verification of all components and their functionality Full diagnostic test is performed utilizing manufacturer’s diagnostic tools BIOS and firmware updates are installed All logs are cleared Passwords and settings are restored to factory defaults Custom configurations are available. Please contact us for a quote or if you have questions regarding current configuration.